Technical Specifications

microcor_ekg_paket_icerigi

Electrical / Mechanical
Power Supply 2 x AA Battery (NiMH, NiCd, alkaline, zinc)
Size 85mm x 87mm x 23mm
Weight 150 gr
Operating Temperature 10°C – 40°C
Storage Temperature -10°C – 60°C
Power Consumption 25mW (stand-by)
180mW (active)
(about 50 hours continuous with alkaline batteries)
Input Noise 15uV pp
Input Impedance >50M
CMRR >110dB
Input Voltage Range +-45mV
Max. Input Offset +-500mV
Frequency Response 0,05-200Hz
Calibration Internal Reference
Ekg Acquisition
Data Sampling Rate 8800 samples/s
Data Storage Rate 550 samples/s
Sampling Resolution 24 Bits
Measurement Sensitivity 0.1 uV
Recording Sensitivity 3.5 uV
Equivalent Input Noise 5 uV
Input Leakage Current < 1pA
Filters AC Filter (50/60Hz)
Drift Filter (f-3dB= 0.05 / 0.15 / 0.50 Hz)
EMG Filter (150 / 100 / 40 Hz)
Rf Communication
Usb Adapter Power Consumption 75mW maximum
Communication Frequency 2.4 GHz ISM Band
Rf Transmission Power 1 mW
Communication Range up to 20 meters
Ecg Cable
Cable Material  Slicon
 Electrode Connectors  Clips
Weight 70 gr
Cable Length Chest : 60cm
Limb : 100cm